POLBIONICA UV-Vis Lamp

POLBIONICA UV-Vis Lamp

Leveraging our extensive experience in biomaterials and bioink development, we designed the POLBIONICA UV-Vis Lamp — a specialized laboratory device emitting light at 365 nm and 405 nm. The system is engineered for precise and reproducible photocrosslinking of bioinks and 3D hydrogels.

The lamp provides full control over the photopolymerization process, allowing users to adjust both light intensity and exposure time. This enables optimization of curing parameters depending on the material type and specific research application.

Category:

Description

Its compact and lightweight design enhances everyday laboratory workflows. The device is equipped with a protective UV filter and is ready for immediate use upon unpacking. An intuitive interface allows fast and convenient parameter configuration.

 

The POLBIONICA UV-Vis Lamp is compatible with standard multiwell plates and Petri dishes, ensuring broad applicability across research and biotechnology laboratories.

 

  • Power: 
    • Voltage: 110–230 V (+/−10%) 50/60 Hz 
    • Maximum power consumption: 20 W
  • Safety: 
    • Protection class: II
    • Operating mode: Intermittent, with a maximum continuous exposure time of up to 360 seconds
    • IP enclosure rating: IP 21
  • Lamp operating environmental conditions:
    • Temperature: from +5°C to +40°C 
    • Relative humidity: 20 – 90% (non-condensing) 
    • Atmospheric pressure: from 700 hPa to 1060 hPa
  • Optical parameters: 
    • Wavelength: 365 nm or 405 nm 
    • Maximum light emission power: 13.5 mW/cm² (365 nm) 28.5 mW/cm² (405 nm)
    • Light source: LED: 8x 405 nm, 8x 365 nm
  • Other specifications: 
    • Device dimensions: 121 × 83 × 71 mm (length × width × height) 
    • Packaging dimensions (transport case): 335 × 215 × 95 mm (length × width × height)

Related products